TRACTRIX  hORNS

 

TRACTRIX  110

Very well built Tractrix horn with metal mounting ring for large drivers.

Biggest in an offer and extremely strong.

tractrix110Overall Dimension               1000 mm (39.37″)  Diameter x  870 mm (34.25″) D

Throat for Driver                 up to 4,5 “ ( 115 mm )

Frequency Response           160 Hz Minimum Recommended Crossover Point

 

Speaker Notes  

This horn has a mounting ring on the back made of  MDF for attaching your compression driver. There are no screw holes on the front of this horn because some people prefer to build their own mounting brackets that hold the horn from the back. Others like to sit the horn directly on top of their speaker. It is recommended that you give some support to the mid portion of the horn to take pressure off the mounting bracket when using a heavy compression driver.

TRACTRIX  200

Very well built Tractrix horn with metal mounting ring for larger compression drivers.

Recommended for woofer sizes from 15″ – 18″

tractrix200Overall Dimension               600 mm (23.6″) Diameter x 600 mm (26″ D) (with 1.4″ compression driver)

600 mm (23.6″ )Diameter x 560 mm (22″ D) (with 2″ compression driver)

Driver Size                             1.4″ or 2″ (your choice)

Frequency Response           350 Hz Minimum Recommended Crossover Point

 

Speaker Notes     

This horn has a mounting ring on the back made of  METAL for attaching your compression driver. There are no screw holes on the front of this horn because some people prefer to build their own mounting brackets that hold the horn from the back. Others like to sit the horn directly on top of their speaker. It is recommended that you give some support to the mid portion of the horn to take pressure off the mounting bracket when using a heavy compression driver.

TRACTRIX  350

Very well built Tractrix horn with metal mounting ring for larger compression drivers.

Recommended for woofer sizes from 15″ – 18″.

tractrix350Overall Dimension               340mm (13.4″) Diameter x 340 mm (13.4″ D) (with 1″ compression driver)

340mm (13.4″) Diameter x 285 mm (11.2″ D) (with 1.4″ compression driver)

340mm (13.4″) Diameter x 235 mm (9.25″ D) (with 2″ compression driver)

Driver Size                             1″, 1.4″, or 2″ (your choice)

Frequency Response           520 Hz Minimum Recommended Crossover Point

 

Speaker Notes     

This horn has a mounting ring on the back made of  METAL for attaching your compression driver. There are no screw holes on the front of this horn because some people prefer to build their own mounting brackets that hold the horn from the back. Others like to sit the horn directly on top of their speaker. It is recommended that you give some support to the mid portion of the horn to take pressure off the mounting bracket when using a heavy compression driver.

TRACTRIX  600

Very well built Tractrix horn with metal mounting ring for all standard compression drivers.

Recommended for woofer sizes from 12″ – 15″.

tractrix600Overall Dimension               200 mm (7.87″) Diameter x 147 mm (5.78″ D) (with 1″ compression driver)

200 mm (7.87″) Diameter x 117 mm (4.60″ D) (with 1.4″ compression driver)

200 mm (7.87″) Diameter x 110 mm (4.33″ D) (with 1.5″ compression driver)

200 mm (7.87″) Diameter x   86 mm (3.38″ D) (with 2″ compression driver)

Driver Size                             1″, 1.4″, 1.5″, or 2″ (your choice)

Frequency Response           900 Hz Minimum Recommended Crossover Point

Speaker Notes

This horn has a mounting ring on the back made of  METAL for attaching your compression driver. There are no screw holes on the front of this horn because some people prefer to build their own mounting brackets that hold the horn from the back. Others like to sit the horn directly on top of their speaker. It is recommended that you give some support to the mid portion of the horn to take pressure off the mounting bracket when using a heavy compression driver.

TRACTRIX  1000

Very well built Tractrix horn with metal mounting ring for small compression drivers.

Recommended for woofer sizes from 8″ – 12″.

tractrix1000Overall Dimension               120 mm (4.7″) Diameter x 65 mm (3″ D)

Driver Size                             1″

Frequency Response           1500 Hz Minimum Recommended Crossover Point

 

 

 

 

Speaker Notes   

This horn has a mounting ring on the back made of  MDF for attaching your compression driver. There are no screw holes on the front of this horn because some people prefer to build their own mounting brackets that hold the horn from the back. Others like to sit the horn directly on top of their speaker. It is recommended that you give some support to the mid portion of the horn to take pressure off the mounting bracket when using a heavy compression driver.

These Autotech built waveguides are made with nearly 1/4″ of fibreglass and are extremely strong. Available in a variety of standard colours for no extra charge. You can also order your gloss coat in any other colour on the RAL colour chart for 10% extra.